Description:
RCB focuses on the cutting effect of the milling cutter. The end of the mill cutter has a rake angle and dense chip breaker, so it is good for chip removal. Therefore, it can get better edge quality than the RCF.
Application:
RCB milling cutters are recommended for use with IC substrates, and are especially suitable for general substrates, bare copper plates such as PBGA, CSP, ER board, PTFE, ceramics and other materials.
|
規格Dimension(mm) |
|
建議切削參數Parameters |
||||
|
刃徑øD Mill Dia |
刃長L Flute length |
|
刀具壽命(m) 粗撈/精修 |
轉速(Krpm) Spindle Speed |
下刀速(m/min) Table Feed |
退刀速(m/min) |
|
0.8 |
5.5 |
|
2/4 |
40 |
0.5 |
5 |
|
1.0 |
8 |
|
3/6 |
40 |
0.5 |
5 |
|
1.2 |
8.5 |
|
5/8 |
38 |
0.7 |
5 |
|
1.4 |
8 |
|
8/10 |
34 |
0.7 |
5 |
|
1.5 |
8.5 |
|
10/15 |
34 |
0.7 |
5 |
|
1.6 |
9 |
|
10/15 |
30 |
0.7 |
5 |
|
1.8 |
9 |
|
10/15 |
30 |
0.9 |
5 |
|
2.0 |
10 |
|
12/20 |
28 |
0.9 |
5 |
|
2.4 |
10 |
|
45 |
25 |
0.5 |
5 |